Skip to content
RecallScanner Severity Profile

Mazda MAZDA3

Routine recalls8 campaigns, none flagged critical.
0
RecallScore
Critical
0
Fire risk
0
Crash risk
7
Injuries
0
Deaths
0
Check your specific MAZDA3

Is your VIN affected?

Start typing. We'll decode your VIN as you go.
Your VIN lives on the driver-side dashboard, the door jamb, or your registration card. We don't store it.

All Recalls

8 campaigns
8 recalls💥 7 crash risk
Model year
Software
Jul 14, 2023
1027 days ago

Your rearview camera can flicker or distort, blocking your view and causing a crash.

Affected: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA · 2018
CRASH RISK
NHTSA
Summary

Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.

Consequence

A rearview camera that does not display properly can reduce the driver's rear view, increasing the risk of a crash or injury.

Remedy

Dealers will inspect and replace the rearview camera, as necessary. In addition, dealers will install a wiring harness fastening seal. All repairs will be performed free of charge. Interim notification letters, notifying owners of the safety risk, were mailed September 13, 2023. Final owner letters for affected models and model years in the states of CT, MA, MD, NJ, NY, PA and VA were mailed August 14, 2024. The remaining owner notification letters will be mailed at a future date, anticipated on or before May 1, 2025. Owners may contact Mazda customer service at 1-800-222-5500, Option 6. Mazda's number for this recall is 6023G.

Other
May 7, 2019
2556 days ago

Your front seat head restraint can stick in the release position and fail to lock during a crash.

Affected: SEATS:FRONT ASSEMBLY:HEAD RESTRAINT · 2019
CRASH RISK
NHTSA
Summary

Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles. The seat cover material on both front seats may interfere with the head restraint lock release button, causing it to stick in the release position and not allow the head restraint to lock into place.

Consequence

Loose head restraints may increase the risk of injury in the event of a crash.

Remedy

Mazda will notify owners, and dealers will install spacers at the bottom of the lock release buttons on both front seat head restraints, free of charge. The recall began August 20, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 3819F.

Other
Jul 29, 2019
2473 days ago

Your rearview mirror can detach while driving, blocking your view of traffic behind you.

Affected: VISIBILITY:GLASS, SIDE/REAR · 2019
CRASH RISK
NHTSA
Summary

Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles equipped with manual dimming mirrors. The adhesive between the interior rearview mirror and the housing may not be properly bonded, allowing the mirror to detach from the housing. Note: Vehicles equipped with auto dimming mirrors are not affected by this recall.

Consequence

Rearward visibility will be reduced without the rearview mirror, increasing the risk of a crash.

Remedy

Mazda will notify owners, and dealers will replace the interior rearview mirror assembly, free of charge. The recall began September 19, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 3919G.

Engine
Nov 21, 2017
3088 days ago

Your exhaust valve spring can fail and stall your engine while driving.

Affected: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM · 2018
CRASH RISK
NHTSA
Summary

Mazda North American Operations (Mazda) is recalling certain 2018 Mazda3 vehicles, equipped with an incorrect exhaust valve spring. The incorrect exhaust valve spring may fail while driving, potentially causing an engine stall.

Consequence

An engine stall can increase the risk of a crash.

Remedy

Mazda will notify owners, and dealers will inspect the engines and replace any incorrect exhaust valve springs, free of charge. The recall is expected to begin January 20, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1717K.

Other
Dec 19, 2019
2330 days ago

Your Smart Brake System can falsely detect obstacles and slam on the brakes, causing a crash.

Affected: FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING · 2020
CRASH RISK
NHTSA
Summary

Mazda North American Operations (Mazda) is recalling certain 2019-2020 Mazda3 vehicles. The Smart Brake System (SBS) can falsely detect an obstacle while driving, activating the automatic emergency braking system and suddenly stopping the vehicle.

Consequence

Stopping the vehicle unexpectedly increases the risk of a crash.

Remedy

Mazda will notify owners, and dealers will update the SBS software. In addition, vehicles with certain production dates will receive an instrument cluster software update or replacement and a replacement owner's manual. These repairs will be performed free of charge. The recall began February 14, 2020. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 4219L.

Tires
Jul 6, 2019
2496 days ago

Your wheel can loosen and detach from the vehicle while driving.

Affected: WHEELS:LUGS/NUTS/BOLTS/STUDS · 2019
CRASH RISK
NHTSA
Summary

Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles. The lug nuts on all four wheels may loosen, potentially resulting in a wheel detaching from the vehicle.

Consequence

A wheel separating from the vehicle increases the risk of a crash.

Remedy

Mazda will notify owners, and dealers will tighten the front and rear wheel lug nuts to the correct specification, free of charge. The recall began July 9, 2019. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 3519F.

Other
Apr 4, 2019
2589 days ago

Your windshield wipers can fail in rain or snow and block your view of the road.

Affected: VISIBILITY:WINDSHIELD WIPER/WASHER · 2018
CRASH RISK
NHTSA
Summary

Mazda North American Operations (Mazda) is recalling certain 2016-2018 Mazda3 vehicles. A defective windshield wiper relay may cause the windshield wipers to become inoperative, reducing the driver's visibility.

Consequence

Reduced visibility while driving can increase the risk of crash.

Remedy

Mazda will notify owners, and dealers will replace the front body control module with a new module which uses an improved wiper relay design, free of charge. The recall began May 7, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 3219D.

Electrical
May 14, 2019
2549 days ago

Your airbag and seat belt warning lights can stay off even when safety features are disabled or unfastened.

Affected: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL · 2019
NHTSA
Summary

Mazda North American Operations (Mazda) is recalling certain 2019 Mazda3 vehicles. Due to incorrect programing, the passenger air bag deactivation indicator light may erroneously turn off although the passenger air bag is deactivated. In addition, the seat belt status indicators for both the front passenger seat and/or rear seats may erroneously turn off although the front passenger and/or rear seat belts are unfastened.

Consequence

Incorrect indicator warning lights may lead the driver and/or passengers to be unaware of deactivated air bags or unfastened seat belts, increasing the risk of injury.

Remedy

Mazda will notify owners, and dealers will replace the passenger air bag/seat belt status indicator assembly, free of charge. The recall began July 9, 2019. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 3319E.

Full analysis: how to read the Mazda MAZDA3 recall history
Year range, common components, complaint patterns, and how to use this page.

Understanding the Mazda MAZDA3 recall history

The Mazda MAZDA3 currently has 8 recall campaigns indexed from the NHTSA public database. Each recall represents a formal campaign to fix a defect at no cost to the current owner. Owner complaints are self-reported incidents that haven't (yet) resulted in a recall but can indicate emerging patterns worth watching.

The most frequent recall categories for the MAZDA3 in our dataset are engine (1), software / sensor (1), and electrical (1). These clusters matter when you're shopping for a used MAZDA3: recalls in these systems tend to be the ones most likely to have been skipped by previous owners, because they aren't always visible during a routine test drive or pre-purchase inspection.

The tracked recalls span model years 2018–2020, with campaigns reported to NHTSA between 2017 and 2023. Not every model year carries every recall. Each campaign is scoped to a specific year range and often a specific build window, which is why a VIN lookup is the only way to know whether a particular MAZDA3 is actually affected by any of these campaigns.

How to use this page

The safest path for an owner is to run your VIN through the checker above. A VIN query hits NHTSA's live API and tells you whether your specific MAZDA3 has an open, unresolved recall. If you're researching a used MAZDA3before buying, use the recall list below to understand the model's full history, then check the seller's VIN to see whether prior owners actually completed the free repairs. Many don't, and unresolved recalls can linger for years.

Figures are generated live from the RecallScanner dataset, which is sourced from NHTSA's public recall and complaint APIs and refreshed daily. RecallScanner is independent and not affiliated with Mazda or any U.S. government agency.